To Next Page
J
Jody StanleySep 7, 2025
What to do if Getac M230 Laptop does not resume from Standby/Sleep or Hibernation mode?
- MMark WebsterSep 7, 2025
Connect the AC adapter to the computer or replace the empty battery pack with a fully charged one.
What to do if Getac M230 Laptop does not resume from Standby/Sleep or Hibernation mode?
Connect the AC adapter to the computer or replace the empty battery pack with a fully charged one.
What to do if Getac Laptop does not turn on?
If using external AC power, ensure the AC adapter is correctly and securely connected and that the electrical outlet works properly. If using battery power, ensure the battery is not discharged.
What to do if nothing appears on the Getac M230 Laptop screen?
If the power-on indicator isn't lit, check the electrical outlet, plugs, and power cords. If the power button doesn't respond to a light touch, press it firmly. If using battery power, ensure it has a charge and is correctly installed. The screen might be off due to power management; press any key. The brightness might be too low; increase it using the Fn+F6 hot key. The display output might be set to an external device; switch it back to the LCD by pressing Fn+F9 or changing settings in Display Properties. You can also try turning the computer off, waiting a few seconds, and then turning it back on.
What to do if I cannot access the network on my Getac M230 Laptop?
First, make sure that the LAN driver is correctly installed. Next, check that the LAN cable is properly connected to both the RJ-45 connector and the network hub. Verify that the network configuration is appropriate and that the username and password are correct.
How to improve poor transmission quality on Getac M230 Laptop?
If you are experiencing poor transmission quality, the computer may be out of range, so move it closer to the Access Point or WLAN device. Check for high interference and move the computer away from devices causing radio interference, such as microwave ovens or large metal objects. Plug the computer into a different branch circuit than the affecting device. For further assistance, consult a dealer or experienced radio technician.
What to do if Getac M230 Laptop keyboard does not respond?
Try connecting an external keyboard to your laptop. If the external keyboard works, it's possible that the internal keyboard cable is loose. In this case, contact an authorized dealer for assistance.
How to fix dim characters on Getac M230 screen?
Adjust the brightness and/or contrast.
How to resolve Getac M230 resolution cannot be adjusted to desired setting?
Make sure that the VGA driver is installed correctly.
What to do if Getac M230 Laptop computer does not enter Standby/Sleep or Hibernation mode automatically?
If you have a connection to another computer, the computer does not enter Standby/Sleep or Hibernation mode if the connection is actively in use. Also, make sure that the Standby/Sleep or Hibernation time-out is enabled.
Why is the Getac M230 Laptop numeric keypad disabled?
Make sure that the Num Lock is switched on. Check if the Num Lock Indicator glows or not.
General| Category | Laptop |
|---|---|
| Brand | Getac |
| Model | M230 |
| Display Size | 13.3 inches |
| Connectivity | Wi-Fi, Bluetooth |
| Battery Life | Up to 8 hours |
| RAM | 8GB |
| Storage | 256GB SSD |
| Graphics | Intel Iris Xe Graphics |
| Ports | USB, HDMI, Serial Port |
| Ruggedness | MIL-STD-810G, IP65 |
| Durability | vibration and drop resistant |
