Using the Communication Features
Using the LAN
NOTE: To take advantage of the LAN (Local Area Network) feature, the device driver
supplied with your computer must be installed (see chapter 6 for details).
The internal 10/100/1000Base-T Ethernet module allows you to connect
your computer to a network. It supports data transfer rate up to 1000
Mbps.
To connect the network cable to the LAN module, connect one end of the
LAN cable to the RJ-45 connector on the computer and the other end to
the network hub. The LAN indicator (
) glows to indicate that the
computer is ready for LAN connection.
2-26 Operating Your Computer
To Next Page
