10. Insert the optical drive into the drive bay () and return the release
knob ().
11. Close the optical drive bay cover to secure the drive in place.
Inserting and Removing a Disc
Follow this procedure to insert or remove a disc.
1. Turn on the computer.
2. Locate the optical drive bay on the left side of the computer.
3. Open the optical drive bay cover by pressing on both sides of the
release latch using your thumb and index fingers.
4. Press the eject button and the drive tray will slide out partially. Gently
pull on it until it is fully extended.
2-20 Operating Your Computer
To Next Page
