How do I fix poor transmission quality on my Getac P470 Laptop?
If you are experiencing poor transmission quality on your Getac Laptop, you may be out of range. Move your computer closer to the Access Point or another WLAN device it is associated with. Also, check for high interference in the environment.
Why doesn't the battery operating time indicated by the battery meter match the actual operating time on my Getac P470 Laptop?
To resolve the issue where the battery operating time indicated by the battery meter does not match the actual operating time, initialize the battery.
What to do if my Getac Laptop optical drive cannot read a disc?
If the optical drive on your Getac Laptop cannot read a disc, make sure that the disc is correctly seated in the tray with the label facing up. Also, ensure the disc is not dirty and clean it with a disc cleaning kit if necessary. Verify that the optical drive driver is installed correctly and that the computer supports the disc or the files contained.
How do I resolve sound system recording issues on my Getac P470 Laptop?
To resolve sound system recording issues, adjust the playback or recording sound levels.
What does it mean if bad dots appear on the display of my Getac Laptop at all times?
A small number of missing, discolored, or bright dots on the screen are an intrinsic characteristic of TFT LCD technology and is not regarded as a LCD defect.
How to fix Getac P470 Laptop when resolution cannot be adjusted to desired setting?
Make sure that the device driver is installed correctly.
How to resolve Getac P470 Laptop not recognizing a newly installed device?
If your Getac Laptop doesn't recognize a newly installed device, the device may not be correctly configured in the BIOS Setup program. Run the BIOS Setup program to identify the new type. Also, check if any device driver needs to be installed and if the device needs any jumper or switch settings. Check the cables or power cords for correct connections, and for an external device with its own power switch, make sure that the power is turned on.
How to fix Getac P470 Laptop when the external monitor displays nothing?
If the external monitor displays nothing, make sure that the monitor is turned on and that the monitor’s signal cable is properly connected. You may also need to switch the display to the monitor by pressing the Fn+F5 hot key.
What to do if I cannot access the network on my Getac P470 Laptop?
If you cannot access the network on your Getac Laptop, first ensure that the LAN driver is correctly installed. Next, check that the LAN cable is properly connected to both the RJ-45 connector and the network hub. Verify that the network configuration is appropriate and that your username and password are correct.
Why does nothing appear on my Getac P470 Laptop screen?
If nothing appears on the screen of your Getac Laptop, the screen may have automatically turned off due to power management. Try pressing any key to see if the screen comes back on. Alternatively, the brightness level might be too low, so increase it by pressing the Fn+F7 hot key. Finally, the display output might be set to an external device; switch it back to the LCD by pressing the Fn+F5 hot key.
General| Category | Laptop |
|---|---|
| Manufacturer | Getac |
| Model | P470 |
| Processor | Intel Core i5 or i7 |
| Storage | Up to 1TB SSD |
| Display | 14-inch, Full HD (1920x1080) |
| Graphics | Intel UHD Graphics |
| Ports | USB 3.0, HDMI, Serial |
| Wireless | Wi-Fi, Bluetooth |
| Durability | MIL-STD-810G, IP65 |
To Next Page
