Getac UX10 Series User Manual

6
 The battery pack is shipped to you in power saving mode that protects it
from charging/discharging. It will get out of the mode to be ready for use when
you install the battery pack and connect AC power to the Tablet PC for the
very first time.
 When the AC adapter is connected, it also charges the battery pack. For
information on using battery power, see Chapter 3.
You must use AC power when starting up the Tablet PC for the very first time.
1. Plug the DC cord of the AC adapter to the power connector (

).
2. Plug the female end of the AC power cord to the AC adapter and the male
end to an electrical outlet (

).
3. Power is being supplied from the electrical outlet to the AC adapter and onto
your Tablet PC. Now, you are ready to turn on the Tablet PC.
Turning On and Off the Tablet PC
Turning On
Press the power button ( ) to start up. The Windows operating system should
start.
NOTE: Tapping the screen during startup may invoke a pre-boot menu (unless the
default settings have been changed). If the menu appears, simply select
Continue.

Getac UX10 Series Specifications

General

Resolution	1920 x 1200 pixels
Storage	Up to 512GB SSD
Operating System	Windows 10 Pro
Rugged Features	MIL-STD-810H
Graphics	Intel Iris Xe Graphics
Wireless	Wi-Fi 6
Camera	Rear: 8MP
Security	TPM 2.0
Touchscreen	Capacitive
Connectivity	Optional 4G LTE
Display Size	10.1 inches
Processor	Intel Core i5 or i7
I/O Ports	USB 3.2 Gen 1 Type A x1 USB 3.2 Gen 2 Type C x1 Headphone / Microphone combo x1 DC in x1 Optional: Serial port (RS-232) x1, LAN (RJ45) x1, HDMI x1, Display Port x1, External antenna port for WWAN and GPS