16
Navigating on the Screen
The screen of your Tablet PC is touch-sensitive. You can operate the Tablet PC by
touching the screen with your finger or the stylus.
CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the
touchscreen. Doing so may damage the touchscreen surface.
NOTE: An optical film has been attached to the screen before shipment. The film is
a consumable, which will be worn out by possible scratches. You can purchase
a new one when replacement is required.
Using the Touchscreen
Your Tablet PC has a capacitive touchscreen. This type of touchscreen
responds to objects that have conductive properties, such as fingertips and a
capacitive-tipped stylus.
You can change the touchscreen sensitivity settings to suit your scenario.
Double-tap the Touch Screen Mode shortcut on Windows desktop to open the
settings menu and select one of the options (as shown below).
NOTE:
In high temperatures (above 60
o
C / 140 F), set the mode to Touch instead of
Glove or Pen mode.
If liquid is spilled on the touchscreen causing a wet area, the area will stop
responding to any inputs. For the area to function again, you must dry it.
Enables simultaneous use
with Getac stylus or finger
touch. (You must use the
stylus supplied with your
model.)
Has a higher sensitivity to allow use
(referring to warm gloves
or work gloves, not referring to
touchscreen-capable gloves).
Select this mode when liquids,
such as raindrops, are falling on
the screen and should be
rejected as input. Works best
To Next Page
Loading...
Need help?
General
