Getac UX10 Series User Manual

20
Using Network and Wireless
Connections
Using the LAN (Optional)
Select models have the LAN module. To connect the network cable to the LAN
module, connect one end of the LAN cable to the RJ45 connector on the Tablet
PC and the other end to the network hub.
-or-
NOTE: The location of the connector depends on your model.
Using the WLAN
The WLAN (Wireless Local Area Network) module of your Tablet PC supports
IEEE 802.11ax.
Turning On/Off the WLAN Radio
To turn on the WLAN radio:
Select the network icon in the lower right of the taskbar. Then, select the Wi-Fi
button.
To turn off the WLAN radio:
You can turn off the WLAN radio the same way you turn it on.

Getac UX10 Series Specifications

General

Resolution	1920 x 1200 pixels
Storage	Up to 512GB SSD
Operating System	Windows 10 Pro
Rugged Features	MIL-STD-810H
Graphics	Intel Iris Xe Graphics
Wireless	Wi-Fi 6
Camera	Rear: 8MP
Security	TPM 2.0
Touchscreen	Capacitive
Connectivity	Optional 4G LTE
Display Size	10.1 inches
Processor	Intel Core i5 or i7
I/O Ports	USB 3.2 Gen 1 Type A x1 USB 3.2 Gen 2 Type C x1 Headphone / Microphone combo x1 DC in x1 Optional: Serial port (RS-232) x1, LAN (RJ45) x1, HDMI x1, Display Port x1, External antenna port for WWAN and GPS