Getac UX10 Series - Hot Swapping the Battery Pack (Optional); Hints and Reminders

30
4. Slide the security lock to the locked position ( ).
CAUTION: Make sure the lock is correctly locked, not revealing the underneath red
part.
Hot Swapping the Battery Pack (Optional)
You can hot swap the battery pack if your model has the bridge battery. “Hot
swapping” means you can safely replace the battery pack without shutting down
while your Tablet PC is running on battery power.
Hints and Reminders
See “Replacing the Battery Pack” for replacement instructions and note the
following hints and reminders on hot swapping:
 Make sure the battery pack to be installed is charged.
 The appropriate temperature range for hot swapping the battery pack is
between -15C (-5 F) and 45 C (113 F).
 Check the Battery Hot Swapping Indicator after removing the battery pack.
Hot swap the battery pack only when the indicator lights in green. A red light
Locked
Unlocked