Getac UX10 Series User Manual

31
means there is not enough extra power for you to safely hot swap the
battery pack.
 Once a battery pack is removed, the display brightness level will be fixed at
a low level and cannot be adjusted.
 If a charged battery pack is not inserted within 2 minutes, the Tablet PC
enters Hibernation mode.
 After removing the battery pack, do not connect and immediately disconnect
the AC adapter. This will shut down the Tablet PC.
About the Bridge Battery
For models having the bridge battery:
 The bridge battery is not user-replaceable and is invisible to the operating
system. It never functions as the power source as long as the battery pack is
installed.
 The bridge battery is charged by external AC power if the AC adapter is
connected.
 If the Battery Hot Swapping Indicator blinks in amber, it means the bridge
battery charging is in an abnormal state. Replace the bridge battery in case
this happens.
Battery Hot
Swapping Indicator

Getac UX10 Series Specifications

General

Resolution	1920 x 1200 pixels
Storage	Up to 512GB SSD
Operating System	Windows 10 Pro
Rugged Features	MIL-STD-810H
Graphics	Intel Iris Xe Graphics
Wireless	Wi-Fi 6
Camera	Rear: 8MP
Security	TPM 2.0
Touchscreen	Capacitive
Connectivity	Optional 4G LTE
Display Size	10.1 inches
Processor	Intel Core i5 or i7
I/O Ports	USB 3.2 Gen 1 Type A x1 USB 3.2 Gen 2 Type C x1 Headphone / Microphone combo x1 DC in x1 Optional: Serial port (RS-232) x1, LAN (RJ45) x1, HDMI x1, Display Port x1, External antenna port for WWAN and GPS