Getac UX10 Series User Manual

5
2. Insert the other loop end to the tether hole on the Tablet PC (as indicated by

below). Then, insert the stylus end through the loop (as indicated by

below) and pull it tight.
NOTE: If the hard handle is installed, attach the tether to the D-ring on the hard
handle.
Connecting to AC Power
CAUTION: Use only the AC adapter included with your Tablet PC. Using other AC
adapters may damage the Tablet PC.
NOTE:

Getac UX10 Series Specifications

General

Resolution	1920 x 1200 pixels
Storage	Up to 512GB SSD
Operating System	Windows 10 Pro
Rugged Features	MIL-STD-810H
Graphics	Intel Iris Xe Graphics
Wireless	Wi-Fi 6
Camera	Rear: 8MP
Security	TPM 2.0
Touchscreen	Capacitive
Connectivity	Optional 4G LTE
Display Size	10.1 inches
Processor	Intel Core i5 or i7
I/O Ports	USB 3.2 Gen 1 Type A x1 USB 3.2 Gen 2 Type C x1 Headphone / Microphone combo x1 DC in x1 Optional: Serial port (RS-232) x1, LAN (RJ45) x1, HDMI x1, Display Port x1, External antenna port for WWAN and GPS