Getac UX10 Series User Manual

36
Safety Notices
About the Battery
If the battery is mishandled, it may cause fire, smoke or an explosion and the
battery’s functionality will be seriously damaged. The safety instructions listed
below must be followed.
Danger
 Do not immerse the battery with liquid such as water, sea water or soda.
 Do not charge/discharge or place the battery in high-temperature (more than
80 C / 176 F) locations, such as near a fire, heater, in a car in direct
sunlight, etc.
 Do not use unauthorized chargers.
 Do not force a reverse-charge or a reverse-connection.
 Do not connect the battery with AC plug (outlet) or car plugs.
 Do not adapt the battery to unspecified applications.
 Do not short circuit the battery.
 Do not drop or subject the battery to impacts.
 Do not penetrate with a nail or strike with a hammer.
 Do not directly solder the battery.
 Do not disassemble the battery.
 Keep the battery away from an extremely low air pressure environment as it
may result in an explosion or the leakage of flammable liquid or gas.
Warning
 Keep the battery away from infants.
 Stop using the battery if there are noticeable abnormalities such as
abnormal smell, heat, deformities, or discoloration.
 Stop charging if the charging process cannot be finished.

Getac UX10 Series Specifications

General

Resolution	1920 x 1200 pixels
Storage	Up to 512GB SSD
Operating System	Windows 10 Pro
Rugged Features	MIL-STD-810H
Graphics	Intel Iris Xe Graphics
Wireless	Wi-Fi 6
Camera	Rear: 8MP
Security	TPM 2.0
Touchscreen	Capacitive
Connectivity	Optional 4G LTE
Display Size	10.1 inches
Processor	Intel Core i5 or i7
I/O Ports	USB 3.2 Gen 1 Type A x1 USB 3.2 Gen 2 Type C x1 Headphone / Microphone combo x1 DC in x1 Optional: Serial port (RS-232) x1, LAN (RJ45) x1, HDMI x1, Display Port x1, External antenna port for WWAN and GPS