Getinge ISOTEST - Page 39

GETINGE-LA CALHENE ISOTEST | User manual
NTA 3015/78 C
Approuvé informatiquement / Electronic signature
DEX | Page 39/
74
− If the verification of the bottle is correct, the following window appears. The test
phase starts.
− If the test phase is correct, the following phases then succeed one another
automatically (see steps 10 and 11).
− If the cycle takes place without any faults and the test is declared non-
compliant, the following window appears:
− Check the tightening of the clamps, cable glands and hose attachments.
− Press "stop airlock" and return to step 7.
− If the fault continues, consult the Getinge After-Sales Service Centre for your
region.