GEZE Perlan AUT-NT Wiring Diagram

GEZE Perlan AUT-NT
3
Symbols and means of representation
1 Symbols and means of representation
1.1 Warnings
In these instructions, warnings are used to warn against material damage and injuries.
X
Always read and observe these warnings.
X
Observe all the measures that are marked with the warning symbol and warning word.
Warning
symbol
Warning word Meaning
DANGER
Danger for persons.
Non-compliance will result in death or serious injuries.
WARNING
Danger for persons.
Non-compliance can result in death or serious injuries.
CAUTION
Danger for persons.
Non-compliance can result in minor injuries.
–
CAUTION
Information on avoiding material damage, understanding a concept or optimising the
processes.
1.2 Further symbols and means of representation
Important information and technical notes are emphasised in order to illustrate the correct operation.
Symbol Meaning
means "important note"
means "additional information"
X
Symbol for an action: Here you have to do something.
X
Observe the sequence if there are several action steps.
2 Validity
Valid for units from:
à Hardware: Perlan AUT-NT, Rev. F
à Software: Perlan AUT-NT, V 1.0
3 Product liability
In accordance with the liability of manufacturers for their products as dened in the German "Produkthaftungs-
gesetz" (Product Liability Act), the information contained in these instructions (product information and proper
use, misuse, product performance, product maintenance, obligations to provide information and instructions) is
to be observed. Non-compliance releases the manufacturer from its statutory liability.
4 Notes
4.1 Important safety instructions
To ensure personal safety, it is important to follow these instructions.
Keep these instructions.
à Only qualied personnel who are authorised by GEZE may carry out mounting, commissioning and mainte-
nance.
à GEZE shall not be liable for injuries or damage resulting from unauthorised modication of the equipment.
à GEZE shall not be liable if products from other manufacturers are used with GEZE equipment. Use only origi-
nal GEZE parts for repair and maintenance work as well.
à The connection to the power supply must be carried out by a qualied electrician in accordance with VDE
0100 Part 610.
à The electrical installation at the customer has to have an all-pole power disconnector that can be secured reli-
ably against reactivating (e.g. lockable switch with at least 3mm contact opening).
à A customer-side 10 A overload cut-out must be used as the line-side disconnecting device.

GEZE Perlan AUT-NT Specifications

General

Brand	GEZE
Model	Perlan AUT-NT
Category	Door Opening System
Language	English