GFI System SKYLAB REVERB User Manual

3
User Manual
Every knob is also a button. The following operations can be done on each knob :
TURN PUSH or TAP HOLD TWIST ( hold and turn )
Here’s a summary of what each knob and each switch does, this is just a quick reference, more detailed
explanation will be given in the next chapter.
 Turn - adjust primary parameters.
 Push - toggle expression mapping for the parameter.
 Hold - enter expression heel/toe value setup.
 Twist - Adjust secondary parameter (see table below).
 Turn - select modes.
 Push - Enter OPTIONS menu.
 Hold - enter GLOBALS setting menu.
 Twist - Adjust secondary parameter (see table below).
SKYLAR
REVERB
Primary Parameters Secondary Parameters
knob 1 knob 2 knob 3 knob 1 knob 2 knob 3 knob 4
SPATIUM Modulation Decay Level Lows Highs Predelay Panorama
SHIMMER Shimmer Decay Level Mode Highs Pitch Panorama
PLATE Modulation Decay Level Lows Highs Predelay Panorama
TREMBLE Trem Speed Decay Level Shape Highs Trem Depth Panorama
Modes
KNOB 1, 2, and 3
KNOB 4
5. Knobs and Buttons

GFI System SKYLAB REVERB Specifications

General

Brand	GFI System
Model	SKYLAB REVERB
Category	Music Pedal
Language	English