GFI System SKYLAB REVERB User Manual

Specifications :
 Input impedance : 1 MOhm.
 Output impedance : 1K Ohm.
 DAC / ADC resolution : 24 bits.
 Current consumption : ~110 mA.
 Weight : 0.6 Kg (1.6 lbs).
 Dimension : 12 (L) x 7.2 (W) x 5.5 (H) cm
 Power source : 9VDC (negative center).
Key Features :
 2 presets.
 4 select reverb algorithms.
 Mono / Stereo input and output.
 Expression pedal and tap-tempo input.
 Momentary action supported.
Visit the product page at our website for more demo videos, sound clips, FAQs, and updates.
This product is designed and manufactured by :
User Manual
8
Email : info@gfisystem.com (inquiry)
gfisys@gmail.com (support)
Web : www.gfisystem.com
GFI System
SKYLAR
REVERB
11. Factory Reset
Turn the MODES knob to select No / Yes, then push the MODES button
to confirm - factory reset will be performed and the pedal will start as
normal.
Press and hold the MODES button while powering up the pedal.
Keep holding until the screen reads:
Reset?
NO YES

GFI System SKYLAB REVERB Specifications

General

Brand	GFI System
Model	SKYLAB REVERB
Category	Music Pedal
Language	English