EasyManua.ls Logo

Giatsu IKALA - Page 47

Giatsu IKALA
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER AND INSTALLATION MANUAL
45
MONOBLOCK IKALAMONOBLOCK IKALA
INCREASE AND
DECREASE
Used within cooling and heating modes to adjust the desired temperature16-30°C.
Also used while setting the timer to adjust the duration.
SWING MODE
After machine turns on, press the “SWING” button, louver will swing continuously up
and down; by pressing the button again the movement will stop and the louver remain
in that position. Swing mode can only be adjusted from the remote, and will initially be
turned on by default. the louver will close automatic once switch OFF the product.
COMPRESSOR
PROTECTION
There is a 3 minutes delay on power on. In order to protect the life of the compressor
and electronic components please do not switch on the unit for at least 5 minutes after
you turned the unit off.
WIFI SETUP AND SMART FEATURES
WIFI SETUP
BEFORE YOU START
Ensure your router provides a standard 2.4ghz connection.
If your router is dual band ensure that both networks have different network names (SSID). The provider of
yourrouter/Internetserviceproviderwillbeabletoprovideadvicespecictoyourrouter.
Place the air conditioner as close as possible to the router during setup.
Once the app has been installed on your phone, turn off the data connection, and ensure your phone is
connected to your router via WIFI.
4. OPERATION