BIOS Setup - 46 -
CPU Vcore/Dram Channel A/B Voltage/Dram Channel C/D Voltage/+5V/+12V+/CPU VTT &
Displays the current system voltages.
CPU Temperature/PCH Temperature &
Displays current CPU/Chipset temperature.
System Temperature/2nd System Temperature/3rd System Temperature &
Displays current system temperatures detected by each system temperature sensor on the
motherboard.
CPU FAN Speed/System FAN Speed &
Displays current CPU/system fan speeds.
CPU Warning Temperature &
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS will
emit warning sound. Options are: Disabled (default), 60
o
C/140
o
F, 70
o
C/158
o
F, 80
o
C/176
o
F, 90
o
C/194
o
F.
CPU FAN Fail Warning/1st/2nd SYSTEM FAN Fail Warning &
Allows the system to emit warning sound if the CPU fan or system fans (FAN1/FAN2 connectors) are not
connected or fails. Check the fan condition or fan connection when this occurs. (Default: Disabled)
CPU Fan Speed Control &
Allows you to determine whether to enable the CPU fan speed control function and adjust the fan speed.
Normal Allows the CPU fan to run at different speeds according to the CPU temperature. You can
adjust the fan speed with EasyTune based on your system requirements. (Default)
Silent Allows the CPU fan to run at slow speeds.
Manual Allows you to control the CPU fan speed under the Slope PWM item.
Disabled Allows the CPU fan to run at full speeds.
Slope PWM &
Allows you to control the CPU fan speed. This item is congurable only when CPU Fan Speed Control
is set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.
1st System Fan Speed Control (FAN1 Connector) &
Allows you to determine whether to enable the system fan speed control function for the system fan
connected to FAN1 connector and adjust the fan speed.
Normal Allows the system fan to run at different speeds according to the system temperature. You
can adjust the fan speed with EasyTune based on your system requirements. (Default)
Silent Allows the CPU fan to run at slow speeds.
Manual Allows you to control the CPU fan speed under the Slope PWM item.
Disabled Allows the CPU fan to run at full speeds.
Slope PWM &
Allows you to control the system fan speed. This item is congurable only when 1st System Fan Speed
Control is set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.
2nd System Fan Speed Control (FAN2 Connector) &
Allows you to determine whether to enable the system fan speed control function for the system fan
connected to FAN2 connector and adjust the fan speed.
Normal Allows the system fan to run at different speeds according to the system temperature. You
can adjust the fan speed with EasyTune based on your system requirements. (Default)
Silent Allows the CPU fan to run at slow speeds.
Manual Allows you to control the CPU fan speed under the Slope PWM item.
Disabled Allows the CPU fan to run at full speeds.
To Next Page
Loading...
