Gigabyte G1.ASSASSIN 2 - 5-3 Configuring Audio Input and Output; 5-3-1 Configuring 2;4;5.1;7.1-Channel Audio

Appendix - 98 -
5-3-1 Conguring 2/4/5.1/7.1-Channel Audio
The motherboard supports 2/4/5.1/7.1-channel audio.
Refer to the following for multi-channel speaker
configurations.
2-channel audio: Headphone or Line out. •
4-channel audio: Front speaker out and Rear •
peaker out.
5.1-channel audio: Front speaker out, Rear speaker •
out, and Center/Subwoofer speaker out.
7.1-channel audio: Front speaker out, Rear speaker out, Center/Subwoofer speaker out, and Side speaker out. •
5-3 Conguring Audio Input and Output
A. Configuring Speakers
(The following instructions use Windows 7 as the example operating system.)
Center/Subwoofer
Speaker Out
Line In/Mic In
Rear Speaker Out
Front Speaker
Out
Side
Speaker Out
Step 1:
Connect your speakers to the corresponding jacks on
your computer. While in the operating system, right-
click on the icon in the notification area and select
Playback devices.
Step 2:
On the Playback tab, ensure Speakers is set to the
default playback device. Then right-click on Speakers
and select Configure Speakers.
Step 3:
From the Audio Channels list, select Stereo,
Quadraphonic, 5.1 Surround, or 7.1 Surround
according to the type of speaker configuration you
wish to set up. Then follow the on-screen instructions
to complete.