Gigabyte G1.ASSASSIN 2 - Configuring S;PDIF out

- 99 - Appendix
5-3-2 Conguring S/PDIF Out
The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio
quality.
1. Connecting a S/PDIF Out Cable:
Connect a S/PDIF optical cable to an external decoder for transmitting the S/PDIF digital audio signals.
(Note) Select SPDIF Out if you use the S/PDIF Out connector on the back
panel for digital audio output or HDMI Out screen if you use the
internal S/PDIF Out connector (SPDIF_O) on the motherboard.
2. Configuring S/PDIF Out:
Step 1:
While in the operating system, right-click on the icon in
the notification area and select Playback devices.
Step 2:
On the Playback tab, right-click on SPDIF Out
(Note)
, select
Set as Default Device, and then open the Properties
dialog box.
Step 3:
You can go to the Supported Formats tab to select the
formats to be decoded or the Advanced tab to select the
sample rate and bit depth.
O.C.
Connects to a S/PDIF optical cable