Gigabyte G1.ASSASSIN 2 - 2-6 Peripherals

- 51 - BIOS Setup
2-6 Peripherals
USB 2.0 Devices (Intel X79 Chipset) &
Enables or disables the USB 2.0 controllers integrated with the Intel X79 Chipset. (Default: Enabled)
Intel SATA Control Mode &
Enables or disables RAID for the SATA controllers integrated in the Intel X79 Chipset or congures the
SATA controllers to AHCI mode.
IDE Mode Disables RAID for the SATA controllers and congures the SATA controllers to IDE 
mode.
RAID Mode Enables RAID for the SATA controllers. 
AHCI Mode Congures the SATA controllers to AHCI mode. Advanced Host Controller Interface 
(AHCI) is an interface specication that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
Disabled Disables the SATA controllers. 
Legacy USB Support &
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
USB3.0 Support (Fresco FL1009 USB Controllers) &
Enables or disables the Fresco FL1009 USB 3.0 controllers. (Default: Enabled)
XHCI Hand-off &
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Enabled)
EHCI Hand-off &
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
Port 60/64 Emulation &
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Enabled)