Gigabyte G1.ASSASSIN 2 - Page 52

BIOS Setup - 52 -
USB Storage Devices &
Displays a list of connected USB mass storage devices. You can congure how each device is going to be
treated. For example, you can emulate a USB ash drive as a oppy disk drive. (Default: Auto)
GSATA Controller (Marvell 88SE9172 Chip, GSATA3 6 and GSATA3 7 connectors) &
Enables or disables RAID for the SATA controllers integrated in the Marvell 88SE9172 chip or congures
the SATA controllers to AHCI mode.
IDE Mode Disables RAID for the SATA controllers and congures the SATA controllers to IDE 
mode.
RAID Mode Enables RAID for the SATA controllers. 
AHCI Mode Congures the SATA controllers to AHCI mode. Advanced Host Controller Interface 
(AHCI) is an interface specication that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
Disabled Disables the SATA controllers. 
GSATA Controller (Marvell 88SE9172 Chip, eSATA3 Connectors on the Back Panel) &
Enables or disables RAID for the SATA controllers integrated in the Marvell 88SE9172 chip or congures
the SATA controllers to AHCI mode.
IDE Mode Disables RAID for the SATA controllers and congures the SATA controllers to IDE 
mode.
RAID Mode Enables RAID for the SATA controllers. 
AHCI Mode Congures the SATA controllers to AHCI mode. Advanced Host Controller Interface 
(AHCI) is an interface specication that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
Disabled Disables the SATA controllers. 
Marvell ATA Controller Conguration `