Gigabyte G291-2G0 - Page 108

BIOS Setup - 108 -
5-3-7-2 PCH sSATA Conguration
PCH sSATA Conguration
sSATA Controller(s)
Enable/Disable sSATA controller.
Options available: Enable/Disable. Default setting is Enable.
Congure sSATA as
Congure on chip SATA type.
AHCI Mode: When set to AHCI, the SATA controller enables its AHCI functionality. Then the RAID
function is disabled and cannot be access the RAID setup utility at boot time.