Gigabyte GA-E7AUM-DS2H - MB Intelligent Tweaker(M.I.T.)

- 39 - BIOS Setup
2-3 MB Intelligent Tweaker(M.I.T.)
(Note) This item appears only if you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
MB Intelligent Tweaker(M.I.T.)
Parameters Setting Current Value
FSB - Memory Clock Mode [Auto]
x FSB - Memory Ratio Auto
x FSB (QDR), MHz Auto 800.0
Actual FSB (QDR), Mhz 800.0
x MEM (DDR), MHz Auto 800.0
Actual MEM (DDR), Mhz 800.0
 Memory Timing Setting [Press Enter]
Robust Graphics Booster [Disabled]
x VGA Core Clock + 1%
CPU Clock Ratio
(Note)
[12X]
********
System Voltage Optimized
********
System Voltage Control [Auto]
x DDR2 Voltage Control Normal
x FSB Voltage Control Normal
x Chipset Voltage Control Normal
x CPU Voltage Control Normal
Normal CPU Vcore 1.32500V
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
• Whether the system will work stably with the overclock/overvoltage settings you made is
dependent on your overall system configurations. Incorrectly doing overclock/overvoltage
may result in damage to CPU, chipset, or memory and reduce the useful life of these
components. This page is for advanced users only and we recommend you not to alter the
default settings to prevent system instability or other unexpected results. (Inadequately
altering the settings may result in system's failure to boot. If this occurs, clear the CMOS
values and reset the board to default values.)
• When the System Voltage Optimized item blinks in red, it is recommended that you set
the System Voltage Control item to Auto to optimize the system voltage settings.
FSB - Memory Clock Mode
Auto BIOS will automatically set the FSB-Memory clock mode. (Default)
Linked Allows you to set FSB speed manually; the memory speed changes proportion-
ally along with the FSB speed.
Unlinked Allows you to set FSB speed and memory speed individually.
FSB - Memory Ratio
This item is configurable only if the FSB-Memory Clock Mode option is set to Linked.
Auto BIOS will automatically set the FSB-Memory ratio. (Default)
Sync Mode Sets FSB-Memory ratio synchronously.
FSB (QDR), MHz
Allows you to manually set the CPU host frequency. The adjustable range is from 400 MHz to
2500 MHz. This item is configurable only if the FSB-Memory Clock Mode item is set to Linked
or Unlinked.
Actual FSB (QDR), Mhz
The value depends on the FSB (QDR), MHz setting.