2-6 Server Mgmt
& BMC Support
Enables or disables interfaces to communicate with BMC. (Default: Enabled)
& Wait For BMC
Allows you to determine whether to wait for BMC response for specied time out. In PILOTII, BMC starts
at the same time when BIOS starts during AC power ON. It takes around 30 seconds to initialize Host to
BMC interfaces. (Default: Disabled)
& FRB-2 Timer
Enables or disables the FRB-2 Timer. (Default: Enabled)
& FRB-2 Timer timeout
Enters value between 1 to 30 minute(s) for FRB-2 Timer Expiration. This item is available when FRB-2
Timer is set to Enabled.
& FRB-2 Timer Policy
Congures how the system should respond if the FRB-2 Timer expires. This item is available when FRB-2
Timer is set to Enabled. Options are: Do Nothing (default), Reset, Power Down, and Power Cycle.
& OS Watchdog Timer
Enables or disables the OS Watchdog Timer function. (Default: Disabled)
& OS Wtd Timer Timeout
Enters value between 1 to 30 minute(s) for OS Boot Watchdog Timer Expiration. This item is available
when OS Watchdog Timer is set to Enabled.
& OS Wtd Timer Policy
Congures how the system should respond if the OS Boot Watchdog Timer expires. This item is available
when OS Watchdog Timer is set to Enabled. Options are: Do Nothing, Reset (default), Power Down, and
Power Cycle.
- 35 -