Gigabyte GA-X79-UP4 - Page 42

BIOS Setup
- 42 -
& Vcore Loadline Calibration
 AllowsyoutosettheLoad-LineCalibrationlevelfortheVcore.Thelevelsare(fromhighesttolowest):
Extreme, Turbo, High, Medium, and Standard. Selecting a higher level keeps the Vcore more consistent
with what is set in BIOS under heavy load. AutoletstheBIOSautomaticallycongurethissettingandsets
thevoltagefollowingIntel'sspecications.(Default:Auto)
& IMC Voltage Loadline Calibration
 AllowsyoutocongureLoad-LineCalibrationfortheIMCvoltage.ThisitemallowsyoutoadjusttheV-droop
value. The higher the V-droop value, the lower the output voltage will be under heavy load.
Auto   Lets the BIOS automaticallycongurethis setting and sets V-droop following Intel
specications.(Default)
 +0%~+180% Adjusts the V-droop value.
& DDR CH(A/B) Voltage Loadline Calibration
 AllowsyoutocongureLoad-LineCalibrationforChannelAandChannelBmemoryvoltage.Thisitem
allows you to adjust the V-droop value. The higher the V-droop value, the lower the output voltage will be
under heavy load.
Auto   Lets the BIOS automaticallycongurethis setting and sets V-droop following Intel
specications.(Default)
 +0%~+180% Adjusts the V-droop value.
& DDR CH(C/D) Voltage Loadline Calibration
 AllowsyoutocongureLoad-LineCalibrationforChannelCandChannelDmemoryvoltage.Thisitem
allows you to adjust the V-droop value. The higher the V-droop value, the lower the output voltage will be
under heavy load.
Auto   Lets the BIOS automaticallycongurethis setting and sets V-droop following Intel
specications.(Default)
 +0%~+180% Adjusts the V-droop value.
& CPU Vtt Loadline Calibration
 AllowsyoutocongureLoad-LineCalibrationfortheCPUVttvoltage.Thisitemallowsyoutoadjustthe
V-droop value. The higher the V-droop value, the lower the output voltage will be under heavy load.
Auto   Lets the BIOS automaticallycongurethis setting and sets V-droop following Intel
specications.(Default)
 +0%~+180% Adjusts the V-droop value.
& Vcore Protection
Allows you to set the voltage limit on the Vcore for over-voltage protection. The adjustable range is from
150.0mV to 500.0mV. AutoletstheBIOSautomaticallycongurethissetting.(Default:Auto)
& DDR CH(A/B) Voltage Protection
Allows you to set the voltage limit on Channel A and Channel B memory voltage for over-voltage protection.
The adjustable range is from 150.0mV to 500.0mV. AutoletstheBIOSautomaticallycongurethissetting.
(Default:Auto)
& DDR CH(C/D) Voltage Protection
Allows you to set the voltage limit on Channel C and Channel D memory voltage for over-voltage protection.
The adjustable range is from 150.0mV to 500.0mV. AutoletstheBIOSautomaticallycongurethissetting.
(Default:Auto)
& Vcore Current Protection
Allows you to set the current limit on the Vcore for over-current protection in terms of percentage. The
adjustable range is from 40.0% to 124.0%. AutoletstheBIOSautomaticallycongurethissetting.(Default:
Auto)