Gigabyte GA-X79-UP4 - Configuring S;Pdif Out

Appendix
- 88 -
(Note) Enterthe Digital Output(Optical)screen tocongure furthersettings ifyou usethe S/PDIFOut
connector(s)onthebackpanelfordigitalaudiooutputorentertheDigital Output screen if you use
theinternalS/PDIFOutconnector(SPDIF_O)fordigitalaudiooutput.
2.ConguringS/PDIFOut:
On the Digital Output(Optical) screen
(Note)
, click the Default Format tab and then select the sample rate and
bit depth. Click OK to complete.
5-2-2 ConguringS/PDIFOut
The S/PDIF Out jacks can transmit audio signals to an external decoder for decoding to get the best audio
quality.
1. Connecting a S/PDIF Out Cable:
ConnectaS/PDIFcoaxialcableoraS/PDIFopticalcable(eitherone)tothecorrespondingS/PDIFoutconnector
as shown below and an external decoder for transmitting the S/PDIF digital audio signals.
Connects to a S/PDIF optical cable
Connects to a S/PDIF coaxial cable