Gigabyte GA-X79-UP4 - 2-7 Power Management

- 53 -
BIOS Setup
& AC BACK
Determines the state of the system after the return of power from an AC power loss.
Memory The system returns to its last known awake state upon the return of the AC power.
Always On The system is turned on upon the return of the AC power.
AlwaysOff  ThesystemstaysoffuponthereturnoftheACpower.(Default)
& Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled  Disablesthisfunction.(Default)
Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system.
Any Key Press any key to turn on the system.
& Resume by Alarm
 Determineswhethertopoweronthesystematadesiredtime.(Default:Disabled)
If enabled, set the date and time as following:
Wakeupday:Turnonthesystemataspecictimeoneachdayoronaspecicdayinamonth.
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
& High Precision Event Timer
(Note)
 EnablesordisablesHighPrecisionEventTimer(HPET)forWindows7/Vistaoperatingsystem.(Default:
Enabled)
2-7 Power Management
(Note) SupportedonWindows7/Vistaoperatingsystemonly.