Gigabyte GA-X79-UP4 - 2-6 Peripherals

BIOS Setup
- 50 -
2-6 Peripherals
& LAN PXE Boot Option ROM
 AllowsyoutodecidewhethertoactivatethebootROMintegratedwiththeonboardLANchip.(Default:
Disabled)
& LAN Controller
 EnablesordisablestheonboardLANfunction.(Default:Enabled)(Default:Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& Audio Device Control
 Enablesordisablestheonboardaudiofunction.(Default:Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& USB 2.0 Devices (Intel X79 Chipset)
 EnablesordisablestheUSB2.0controllersintegratedwiththeIntelX79Chipset.(Default:Enabled)
& Intel SATA Controller Mode (Intel X79 Chipset)
 EnablesordisablesRAIDfortheSATAcontrollersintegratedintheIntelX79Chipsetorconguresthe
SATA controllers to AHCI mode.
Disabled Disables this function.
IDEMode  DisablesRAIDfortheSATAcontrollersandcongurestheSATAcontrollerstoIDE
mode.
AHCIMode CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)
RAID Mode Enables RAID for the SATA controllers.
& Legacy USB Support
 AllowsUSBkeyboard/mousetobeusedinMS-DOS.(Default:Enabled)