Gigabyte GA-X99-UD7 WIFI - Page 49

BIOS Setup
- 49 -
& DDR CH(A/B) Voltage Protection
Allows you to set the voltage limit on Channel A and Channel B memory voltage for over-voltage protection.
The adjustable range is from 150.0mV to 325.0mV. AutoletstheBIOSautomaticallycongurethissetting.
(Default:Auto)
& DDR CH(C/D) Voltage Protection
Allows you to set the voltage limit on Channel C and Channel D memory voltage for over-voltage protection.
The adjustable range is from 150.0mV to 325.0mV. AutoletstheBIOSautomaticallycongurethissetting.
(Default:Auto)
& CPU VRIN Current Protection
Allows you to set the over-current protection level for the CPU VRIN voltage.
Auto    LetstheBIOSautomaticallycongurethissetting.(Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different
level of over-current protection for the CPU VRIN voltage.
& DDR CH(A/B) Current Protection
Allows you to set the over-current protection level for Channel A and Channel B memory voltage.
Auto    LetstheBIOSautomaticallycongurethissetting.(Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different
level of over-current protection for the memory voltage.
& DDR CH(C/D) Current Protection
Allows you to set the over-current protection level for Channel C and Channel D memory voltage.
Auto    LetstheBIOSautomaticallycongurethissetting.(Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different
level of over-current protection for the memory voltage.
& CPU VRIN PWM Thermal Protection
Allows you to set the PWM thermal protection threshold for the CPU VRIN. The adjustable range is from
120
o
C~130
o
C.(Default:Auto)
& CPU VRIN PWM Switch Rate
 AllowsyoutosettheCPUVRINPWMfrequency.Theadjustablerangeisfrom400.0KHzto600.0KHz.
(Default:Auto)
& DDR CH(A/B) PWM Switch Rate
Allows you to set the PWM frequency for Channel A and Channel B memory. The adjustable range is from
300.0KHzto500.0KHz.(Default:Auto)
& DDR CH(C/D) PWM Switch Rate
Allows you to set the PWM frequency for Channel C and Channel D memory. The adjustable range is from
300.0KHzto500.0KHz.(Default:Auto)
& PWM Phase Control
Allows you to automatically change the PWM phase according to the CPU load. The power-saving
levelsare (fromlowesttohighest):eXmPerf (ExtremePerformance),HighPerf(High Performance),
Perf(Performance),Balanced,MidPWR(MidPower),andLitePWR(LightPower).Auto lets the BIOS
automaticallycongurethissetting.(Default:Auto)
& S3SaveMode
Determines whether to allow memory voltage to drop to a power-saving level when the system is in S3
state.(Default:Disabled)