To Next Page

To Previous Page

Unique Features

- 87 -

Step 4:

During the POST, press <Delete> to enter BIOS Setup. Select Load Optimized Defaults on the Save&Exit

screen and press <Enter> to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update,

so we recommend that you reload BIOS defaults.

Step 5:

Select Save&ExitSetup and press <Enter>. And then select Yes to save settings to CMOS and exit BIOS

Setup. The procedure is complete after the system restarts.

Select Yes to load BIOS defaults

Gigabyte GA-X99-UD7 WIFI User Manual

Questions and Answers: