Gigabyte MC13-LE0 - PCI Subsystem Settings

- 44 -
BIOS Setup
2-2-7 PCI Subsystem Settings
Parameter
Description
PCI BUS Driver Version Displays PCI BUS driver version information.
PCIE_1 I/O ROM
When enabled, this setting will initialize the device expansion ROM for
the related PCI-E slot.
Options available: Disabled, Enabled. Default setting is Enabled.
LE0_M2 I/O ROM
Enable/Disable LE0_M2 device and initialize the device expansion ROM.
Options available: Disabled, Enabled. Default setting is Enabled.
PCIE_3 I/O ROM
When enabled, this setting will initialize the device expansion ROM for
the related PCI-E slot.
Options available: Disabled, Enabled. Default setting is Enabled.
PCIE_3 Lanes
Change the PCIe lanes.
Options available: Auto, x16, x8x8, x8x4x4, x4x4x8, x4x4x4x4. Default
setting is Auto.
PCIE_3 Max Link Speed
Change the PCIe max link speed.
Options available: Auto, Gen1, Gen2, Gen3, Gen4, Gen5. Default
setting is Auto.
Onboard LAN# Controller
(Note)
Enable/Disable the onboard LAN controller.
Options available: Disabled, Enabled. Default setting is Enabled.
Onboard LAN# I/O ROM
(Note)
Enable/Disable the onboard LAN devices, and initializes device
expansion ROM.
Options available: Disabled, Enabled. Default setting is Enabled.
(Note) This section is dependent on the available LAN controller.