Gigabyte R181-2A0 - Removing Chassis Cover

System Hardware Installation - 24 -
3-1 Removing Chassis Cover
Before you remove or install the system cover
• MakesurethesystemisnotturnedonorconnectedtoACpower.
Follow these instructions to remove the rear system cover:
1. Loosenandremovethethumbscrewsecuringthebackcover.
2. Push down the indentation located at the side of the back chassis
3. Slide the cover horizontally to the back and remove the cover in the direction of the arrow.
2
1
3
Follow these instructions to remove the front system cover:
1. Removethevescrewssecuringthefrontsystemcovertothesystem.
2. Flip open the front system cover.
2
1
1