Gigabyte R182-Z90 - Removing the Heat Sink

System Hardware Installation - 29 -
3-3 Removing the Heat Sink
Follow these instructions to remove/install the fan duct:
1. Loosenthecaptivescrewssecuringtheheatsinkinplaceinreverseorder(4
g
3
g
2
g
1).
2. Liftandremovetheheatsinkfromthesystem.
3. To reinstall the heat sink reverse steps 1-2 while ensuring that you tighten the captive screws in
sequential order (1
g
2
g
3
g
4) as seen in the image below.
2
4
3
1