Gigaset CL660A - Getting Started; Package Contents; Base Station Setup

8
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Getting started
Gigaset CL660A / LUG IE-UK en / A31008-M2804-L101-1-7619 / starting_200A.fm / 3/2/18
Getting started
Contents of the package
• One base
• One power adapter for the base
• One phone cable
• One handset
• One battery cover (rear cover for the handset)
• Two batteries
• One charging cradle incl. power adapter
• One user guide
Models with multiple handsets, per handset:
• One handset
• One charging cradle incl. power adapter
• Two batteries and one battery cover
Base
• Insert the phone cable into the
phone connection socket at
the rear of the base until it clicks
into place.
• Insert the power cable from the
power adapter into the other
connection socket .
• Connect the power adapter
• Connect the phone jack
The base station and charging cradle are designed for use in closed, dry rooms within
a temperature range of +5 °C to +45 °C.
The device's feet do not usually leave any marks on surfaces. However, due to the mul-
titude of different varnishes and polishes used on furniture, contact marks on the sur-
faces cannot be completely ruled out.
Never expose the telephone to heat sources, direct sunlight or other electrical
devices.
Protect your telephone from moisture, dust, corrosive liquids and vapours.
4
21
3
1
2
3
4
The network cable must always be connected in order to function, as the phone will
not operate without a power supply.