Gigaset GL7 - Page 57

Gigaset GL7 / LUG IE-UK_INT en / A31008-N1199-L101-1-7619 / settings.fm / 7/4/22
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version X,X - xx.xx.xxxx
Settings
57
Enabling/disabling caller display
When this function is enabled, your phone number is sent to the person at
the other end.
  Settings  OK  Network & Connectivity  Calling  OK
 Select a SIM card  OK  Caller ID  OK  Hide or display
phone number
 OK
Setting up Call divert
If you are currently on a call or the phone can not be contacted, you can
enable automatic Call divert.
Call diverts can be set up for the following situations:
• Always forward / Forward when busy
• Forward when unanswered / Forward when unreachable
  Settings  OK  Network & Connectivity  Calling  OK
 Select a SIM card  OK  Call Forwarding  OK  Select the
type of call divert
 OK  Enter the phone number  Save
Setting up Call barring
Specify whether you want to restrict incoming and outgoing calls. So calls to
numbers abroad can be prohibited for example, but calls within the national
network remain possible.
The following calls can be barred:
• All (for incoming and outgoing calls)
• International (for outgoing calls)
• International except home country (for outgoing calls)
• All while roaming (for incoming calls)
An unblocking code is required
to unblock barred calls.
  Settings  OK  Network & Connectivity  Calling  OK
 Select the SIM card  OK  Call Barring  OK
Enable/disable call barring:
 Select the call barring required  OK  Enable or disable call barring
 OK
Specify/change the unblocking code:
 Change passcode  OK  Enter and confirm the unblocking code
 Change