© TheGigRig Ltd 2013
1
TABLE OF CONTENTS
1. Introduction
2. Quick Start
3. Buttons and Connections
4. Basic Operation and Effects Loops
5. Control Features
a) Aux/Tuner Out
b) Pre Gain
c) Post Gain
d) Remote Switches
e) Output Selection
f) Phase Reverse Out2
6. Stomp Box Mode
7. Stomp Box mode SUBTRACT
8. Bank Up Engage
9. Post Gain Functions
a) Movable Volume Insert Loop
b) Delay Spill Over
10.MIDI IN and OUT
11.ADVANCED FEATURES
a) Start Up Options
b) Software
c) Factory Reset
12.G2’s True Bypass Dynamic Computed Array
13.FAQ’s and Set Up Examples
a)Connecting an amplifier’s’ effects loop
b)Wet/Dry rigs
c)Best order of effects
14.Tech Spec and Patent