GILBARCO VEEDER-ROOT BRCM2.X User Manual

Before You Begin
Page 12 MDE-5265E BRCM2.x Installation and Upgrade Instructions · April 2021
Mounting Requirement
The BRCM2 and BRCM2 Expander are mounted with two fasteners, shown on the left and
right side of the assembly. The unit must be mounted on the wall above the wiring trough, and
be connected to the wiring trough with a regulatory-approved conduit method.
After mounting, each fastener must be able to withstand a minimum
of a 30-pound shear force
and a 30-pound pull force.
Figure 5: Fasteners for Mounting


GILBARCO VEEDER-ROOT BRCM2.X Specifications

General

Brand	GILBARCO VEEDER-ROOT
Model	BRCM2.X
Category	Control Unit
Language	English