Appendix B: Configuring Distribution Boards
Page 40 MDE-5265E BRCM2.x Installation and Upgrade Instructions · April 2021
Appendix B: Configuring Distribution Boards
The following are the major jumpers for the distribution boards:
D-Box Board Part
Number POS Interface
Single Board or Dual
Boar
d with Two
Connections to POS
Dual Board, One Connection to
PO
S
Current Loop Drive to
Forecourt
T19547
D-box board used
in
PA0306.
(1 board supports 8
dispensers).
Two-wire only JP11-B
JP13-B
Board with POS connection
JP11-B
JP13-A
20
mA
JP9 in (20 mA)
JP10 out (34 mA)
Board without POS connection
JP11-A
JP13-B
34 mA
JP9 out (20 mA)
JP310 in (34 mA)
45 mA
JP9 out (20 mA)
JP10 out (34 mA)
T17651
D-box board also
used in P
A0261.
(1 board supports 8
dispensers).
Two-wire
JP10-B (TW)
JP12-b (TW)
JP14-out
JP11-B
JP13-B
Board with POS connection
JP11-B
JP13-A
34 mA
JP9 - GCATS (A)
RS-422
JP10-A(‘422)
JP12-A(‘422)
JP14-in
Board without POS connection
JP11-A
JP13-B
45 mA
JP9 - PUMPS/ CRINDS
(B
)
M11000
D-box board used
in
PA0409.
(1 board supports 8
dispensers).
Two-wire
JP10-B (TW)
JP12-b (TW)
JP422-out
JP18-B
JP916-out
Board with POS connection
JP18-B
JP916-in
20 mA
JP20 in (20 mA)
JP34 out (34 mA)
RS-422
JP10-A(‘422)
JP12-A(‘422)
JP422-in
Board without POS connection
JP18-A
JP916-out
34 mA
JP20 out (20 mA)
JP34 in (34 mA)
45 mA
JP20 out (20 mA)
JP34 out (34 mA)
M16107
1 board supports
16 dispe
nsers and
includes FWB
function.
Two-wire
JP POSA+ -B
JP POSA- -B
JP POSB+ -B
JP POSB- -B
Single POS mode
JP_RX-A
JP_TX-A
JP24A
JP24B-A
20 mA
JP1C -B (20 mA)
34 mA
JP1C -A (35 mA)
45 mA
JP1C Open (45 mA)
RS-422
JP POSA+ -A
JP POSA- -A
JP POSB+ -A
JP POSB- -A
Dual POS mode
JP_RX-B
JP_TX-B
JP24A
JP24B-B
20 mA
JP1C -B (20 mA)
34 mA
JP1C -A (35 mA)
45 mA
JP1C Open (45 mA)
JP24A and JP24B are used to select if high speed go
es to both halves of the board.
To Next Page
Loading...
Need help?
General