03_38
03_39
Rear-view mirrors (03_38, 03_39)
To adjust mirrors, loosen the lock nut «A», place the mirror stem adequately and
tighten the lock nut. The rear-view mirror is assembled on a stem with a ball 'joint'.
The mirror can be adjusted to the desired position manually.
03_40
Front and rear disc brake (03_40)
The brake disc and pad wear is automatically compensated, therefore it does not have
any effect on brake functioning. For this reason it is not necessary to adjust the brakes.
An excessively elastic brake lever stroke may indicate the presence of air in the brake
circuit or a failure in the braking system. In this case, mainly due to the importance of
brakes to guarantee safe riding conditions, the vehicle should be taken to an Author-
ised Service Centre or Dealer.
68
To Next Page