Gill WindSonic - Page 10

WindSonic Doc No 1405 PS 0019 Issue 28 November 2019
9
Environmental
Moisture protection
IP66
Temperature
Operating -35C to +70C Storage -40C to +80C
Humidity
Operating <5% to 100%
EMC
EN 61326
Standards
Manufactured within ISO9001: 2008 quality system
Power requirement
5 – 30 V DC Option 1 and 2 units (WindSonic).
7 – 30 V DC. Option 3 units (WindSonic).
Current drain depends on variant i.e. RS232 approximately 9mA rising
to 44mA for Analogue variant.
Lowest power consumption is obtained with the following
configuration: -
M2, P20, B3, S9 (approximately 5.5mA at 12v).
12 – 30 V DC Option 1, 2and 3 units (WindSonic 75).
Current drain i.e. RS232 approximately 13mA at 12v dc.
Mechanical
Size / weight
142mm diameter x 163mm 0.5kg
Mounting
Pipe mounting 1.75 inches (44.45mm) diameter
Material
External - Acrylate Styrene Acrylonitrile, Polycarbonate blend.
The Specification for the Option 4 SDI-12 unit is detailed in Section 14.