Gill WindSonic User Manual

WindSonic Doc No 1405 PS 0019 Issue 28 November 2019
10
6 PRE-INSTALLATION
6.1 Equipment supplied
Item
Quantity
WindSonic
1
Connector and Mounting Screws comprising:-
9 Way connector
Connector Contacts
Sealing Gland
Sealing Washer
1
9
1
1
Washer shake proof
3
Screws – M5 stainless steel
3
User Manual, Wind and WindView Software on the CD
1
Wind and WindView software is available free of charge from the Gill website –
http://gillinstruments.com/main/software.html
6.1.1 WindSonic Part Numbers
1405-PK-021 Black WindSonic Option 1 – RS 232 output only
1405-PK-068 White WindSonic Option 1 – RS 232 output only
1405-PK-038 Black WindSonic Option 2 – RS 232, 422 & 485 (point to point) output
1405-PK-072 White WindSonic Option 2 – RS 232, 422 & 485 (point to point) output
1405-PK-040 Black WindSonic Option 3 – RS 232, 422, 485 p to p & analogue output
1405-PK-073 White WindSonic Option 3 – RS 232, 422, 485 p to p & analogue output
1405-PK-100 Black WindSonic Option 4 – SDI-12 output only
1405-PK-110 White WindSonic Option 4 – SDI-12 output only
1405-PK-400 Black WindSonic 75 Option 1- RS232 output only
1405-PK-420 Black WindSonic 75 Option 2 RS 232, 422 & 485 (point to point) output
1405-PK-430 Black WindSonic 75 Option 3 RS 232, 422 & 485 p to p & analogue op.
Optional extras:
Item
Part No
Cable 4 Pair, twisted and shielded 24 AWG
026-03156
Cable 3 Pair, twisted and shielded 24AWG
Cable 15 metres (4 twisted pairs (seven contact wires), shielded
24AWG – Seven Connector pins attached to one end and eight
stripped wires the other).
WindSonic connector (1 supplied as standard see above)
WindSonic Support Tube 0.5 metre (Aluminium)
026-02660
1405-10-080
1405-PK-069
1405-30-056
Bracket for mounting to a Pole, includes a WindSonic Adaptor
1771-PK-115

Gill WindSonic Specifications

General

Brand	Gill
Model	WindSonic
Category	Measuring Instruments
Language	English