WindSonic Doc No 1405 PS 0019 Issue 28 November 2019
15
Now screw the next part of the connector into place.
Now screw the cable-clamping nut into place.
The connector can now be removed from the WindSonic.
NOTE: To disassemble the connector, reverse this procedure.
Spares.
For spares purposes the complete WindSonic Souriau Clipper connector comprises of:-
9 way Connector CL1F1201.
Connector female contact CM10SC10MQ (size 20 contact).
Sealing Gland Clipper size1 CL101021 (suitable for cables 6-12mm outer diameter).
To Next Page
Loading...