17. Setting time and date
In Idle-on status, press key K5GR1 and keep it pressed for about 10 seconds until you see
Clock adjust
on the display.
Within 30 seconds press K5GR1 and you see
Temperature Cup Warmer
on the display.
(note: when “Dose setting” and “CupWarmer” are displayed, hold the K5GR1 key qown to switch to the “clock Adjust”
phase
Clock Adjust
Press K3GR1 to confirm.
You see “Clock adjust hh.mm XXXXXX” on the display.
Where: hh – current hour (0..23)
mm – current minute
XXXXXX – day of the week
To modify the parameter use keys K1GR1 (+) or K2GR1 (-), confirm with K5GR1.
Press K5GR1 again to move to automatic activation setting.
18. Automatically switch on and off
For setting the time to switch on or off automaticly the machine:
Auto On/Off
aaaa : hh.mm
Legend:
- Swicht on time “hours” (AAA = On)
- Swicht on time “minutes” (AAA = On)
- Swicht off time “hours” (AAA = Off)
- Swicht off time “minutes” (AAA = Off)
- Day off
Use the K5GR1 to move from one to another
It is possible to set 1 switch-on and 1 switch-off, anf they apply to every day of the week
If the automatic activation/&deactivation must be enabled, go the time programming screen and press K1GR1(+) or K2GR1(-)
until these words appear on the screen.