To Next PageTo Next Page
Need help?Do you have a question about the Ginlong Solis Series and is the answer not in the manual?
General| MPPT | Yes |
|---|---|
| Cooling | Natural convection |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Manufacturer | Ginlong |
| Series | Solis |
| Communication | RS485 |
| Output Voltage | 220/230/240V |
| Output Frequency | 50Hz / 60Hz |
| Number of MPP Trackers | 1 |
| Operating Temperature Range | -25°C to 60°C |
Describes the Solis single phase US series inverters and lists the available models.
Lists the parts included when receiving the inverter for installation.
Explains safety symbols used in the manual to highlight risks and important information.
Provides essential safety guidelines for installation and operation to prevent hazards.
Outlines conditions and procedures for safe and correct inverter usage according to standards.
Details the components and indicators on the inverter's front panel.
Explains the meaning of the POWER, OPERATION, and ALARM LED indicators.
Describes the function of the ESC, UP, DOWN, and ENTER keys on the inverter keypad.
Lists the information displayed on the inverter's two-line Liquid Crystal Display.
Provides criteria for selecting an optimal and safe location for inverter installation.
Details the steps and considerations for securely mounting the inverter on a wall.
Explains how to make the necessary DC and AC electrical connections to the inverter.
Provides step-by-step instructions for safely starting up the inverter.
Details the correct procedure for safely shutting down and stopping the inverter.
Outlines the four main submenus available in the inverter's operation menu.
Accesses operational data and information from the inverter's main menu.
Allows setting the current time and date on the inverter.
Enables setting a unique address for the inverter when connected to a PC.
Displays the 10 most recent alarm messages and their timestamps.
Shows the internal temperature reading of the inverter.
Displays the reference standard the inverter complies with.
Shows the inverter's model and software version numbers.
Presents internal data for service technicians.
Allows selection of the grid's reference standard for operation.
Controls the start and stop of the inverter's power generation to the grid.
Function to set a new password for accessing advanced menus.
Allows recalibration of total energy values if they have been cleared or altered.
Details the detection and handling of arc faults in DC circuits for AFCI versions.
