Ginlong Solis Series User Manual

2.Safety Instructions
2.2 General Safety Instructions
WARNING:
Electrical installations must be done in accordance with the local and national
electrical safety standards.
.5.
CAUTION:
CAUTION, RISK OF ELECTRIC SHOCK symbol indicates important safety
instructions, which if not correctly followed, could result in electric shock.
CAUTION:
CAUTION, HOT SURFACE symbol indicates safety instructions, which if not
correctly followed, could result in burns.
NOTE:
NOTE symbol indicates important safety instructions, which if not correctly
followed, could result in some damage or the destruction of the inverter.
2.1 Safety Symbols
Safety symbols used in this manual, which highlight potential safety risks and important
safety information, are listed as follows:
WARNING:
WARNING symbol indicates important safety instructions, which if not
correctly followed, could result in serious injury or death.
Improper use may result in potential electric shock hazards or burns. This manual
contains important instructions that should be followed during installation and
maintenance. Please read these instructions carefully before use and keep them for
future reference.
WARNING:
Please don’t connect PV array positive(+) or negative(-) to the ground, it could
cause serious damage to the inverter.
1. Introduction
.4.
1.2 Packaging
Part NO.
1
Description
PV grid tie inverter
2
Wall mounting bracket
3
Locking screws
4
Expansion screws
1
5
3
2
4
Manual
5
Number
1
1
2
4
1
When you receive the inverter, please check if all the parts listed below are included:
Table 1.1 Accessory list
2014, N ingbo G inlon g Technol ogies C o., Ltd .
C
PV Gri d Tie Inve rter
Insta llati on and Op erati on Manu al
Solis Single Phase Inverter
Ver 2.3
-US ve rsion

Ginlong Solis Series Specifications

General

Brand	Ginlong
Model	Solis Series
Category	Inverter
Language	English