BASIC SYSTEM OVERVIEW
The VISION Awning consists of three main components:
1.
Mechanical system – consisting of:
•
The enclosure (or cassette) protects the awning while closed.
•
The roller tube which is mounted within the cassette.
•
The top cover or fabric rolled onto the roller tube and connected to the lead
rail that extends from the enclosure when the awning is opened.
•
The folding arms that supports the lead rail and the fabric.
•
The tubular motor which is mounted inside of the roller tube that controls the
extension and retraction of the awning.
2.
Electronic controls – to power and operate the motor:
G-Links Electronics Kit: 98GCK-18
•
98GC136 – 110V Motor controller
•
98GC779G – 12V Motion Sensor
•
98GC230 – 2 Channel, wireless wall switch.
•
98GC105A – 5 Channel, wireless handheld remote.
Please refer to the 98GCK-18 instructions/ programming guide with any questions
regarding these electronic components.
To Next Page
Loading...
