To Next PageTo Next Page
Need help?Do you have a question about the GIRBAU COIN control and is the answer not in the manual?
Key precautions to reduce risk of fire, shock, or injury.
Pictorial warnings indicating electrical, temperature, and mechanical risks.
Symbols used to alert users to hazards or provide precise explanations.
Guidelines for proper machine operation, material compatibility, and care.
Details construction materials, features, and functional aspects of the washers.
Specifies the machine's design for industrial washing and limitations on other uses.
Details the control panel layout, keys, and display reports.
Guides on how to load fabrics properly for optimal washing results.
Explains how to fill the compartments with detergents and other products.
Step-by-step guide for initiating a wash cycle, including payment and door lock.
Lists default program parameters for different model series and regions.
Covers end of cycle, interrupting programs, and power failure scenarios.
Describes the machine's unbalance detection and correction mechanisms.
Steps to access the modification mode using an access code.
Guides on modifying program contents via the Pro menu.
Explains how to set individual program prices using the CASH menu.
Detailed procedure for programming and modifying program prices.
Addresses common operational problems like END/BAL, noise, and leaks.
Provides guidance on what to do if the access code is forgotten.
Suggests battery failure as a cause for clock issues.
Lists system alarms, probable causes, and recommended actions.
Lists various maintenance operations like cleaning the washer and filters.
Provides guidance on cleaning the washing machine's exterior surfaces.
Details how to clean the door seal, emphasizing care.
Steps and tools required to clean electro valve filters.
Guides on cleaning the detergent dispenser for front and top types.
Details the process for cleaning the drain pump, requiring authorized service.
Instructions for monthly checks of the door lock and emergency stop.
Recommends annual overhaul by authorized service for preventive maintenance.
Information on dismantling the machine and its materials.
Manufacturer's advice on managing waste electronic equipment according to regulations.
General
