Glentronics PRO Series - Introduction; System Specifications

Introduction
The Pro Series pair of pumps combination
system is designed to provide both primary
and backup pumping capabilities. The primary
pump will operate as long as it is receiving
AC power. If the power is interrupted, or more
water is coming into the sump than the AC
pump can handle, the backup sump pump
will begin pumping automatically. The backup
system has unique monitoring features that
diagnose a problem and sound an alarm. A
light on the display panel of the control unit
will indicate the cause of the alarm and the
corrective action. The two systems have been
preassembled for easy installation.
To extend the battery runtime, two batteries
may be connected to the Pro Series C50
system by purchasing a second battery
as well as a set of battery jumper cables.
    
this use (Model PJC) are available from the
manufacturer, Glentronics, Inc.
The Combination Sump Pump System
includes:
        

that plugs into the wall outlet
• A gray backup pump

cables, and an internal, 13-Amp charger
• A battery box
• A rubber union or no-hub coupling
You will also need to supply:
• A Pro Series B12-100 standby battery.
Pro Series standby batteries are specically
designed to work with your battery backup
sump pump system. Glentronics can not
guarantee the compatibility of other brands
of batteries. For optimal performance the
use of a Pro Series standby battery is
highly recommended.
• DO NOT use an automotive battery with this
system
• A surge protector (recommended for the
backup controller)
For some installations you may need these
additional items:

plumbing
• A PVC pipe connector or a rubber union
• PVC pipe cleaner and cement
To connect two batteries you will need:
• Two (2) batteries of same type, age and
capacity (so they will have equal power and
charge properly). DO NOT use batteries of
different types, ages or capacities.
• Another battery box
• A set of battery cables with rings on both
ends to connect the two batteries together
(Model PJC, available from Glentronics, Inc.)
System Specications
Power supply requirements .. 
AC pump pumping capacity .. 3,900 GPH @ 10'
...................................................65 GPM @ 10'
DC pump pumping capacity .. 2,400 GPH @ 10'
...................................................40 GPM @ 10'
Overall dimensions .... 
Page 3
No-Hub
Coupling
Primary Pump Controller
Backup
Pump
Controller
Primary
Pump
Battery Cables
Backup Pump
Float Switch
Backup Pump
Battery Box
Primary Pump
Float Switch