9
OWNER’S MANUAL: MOTION 400
ASSEMBLY
Lift the battery cover and insert the two AAA size batteries
(included) into the remote as shown in the gure.
Replace the battery cover.
Remote is already linked with the base.
Insert the mattress retainer bar upright as shown.
Turn the power supply upside down to access the battery
cover, then slide the battery cover off.
Insert the two 9V batteries (included) into the compartment
and slide the cover back on.
NOTE:
The battery backup will allow for the bed to be lowered
if a power outage occurs. It is not recommended to do
anything except lower the bed, as the battery backup will
not last if the features are continually used.
B
I
D
J
C
Insert AC plug into an AC outlet having 100-240V AC,
50/60Hz. Avoid outlets that work only with light switch.
F
NOTE:
If attaching headboard brackets (available separately) to
the base, see the included instructions. Otherwise, place
the desired mattress onto the base and enjoy your new
adjustable base!
8
9
10
11
12
To Next Page
Loading...
