Gliderol GENESIS OPTIMA - Adjust the Belt Tension; Secure Track to Power Unit; Attach Track to Lintel Bracket

6
3.3 Adjust the Belt Tension
Tension the belt within the shaft by adjusting the nut clockwise until all slack is removed from the belt,
being careful not to overtighten.
3.4 Secure Track to Power Unit
Place the track end over the geared shaft of the power unit and slide down, ensuring the track and the
unit are correctly aligned. Secure the track to the power unit using the U-brackets and M6 nuts provided.
3.5 Attach Track to Lintel Bracket
Making sure to protect the surface of the power unit, attach the track to the previously installed lintel
bracket using the track pin and R-clip provided.